Night time setting

Have some questions or having issues with your IP Camera(s), Post them here for the mods and other users to assist you with.
User avatar
Revo2Maxx
Site Admin
Posts: 6820
Joined: Sat Jun 15, 2019 3:05 pm

Re: Night time setting

Post by Revo2Maxx »

Well I thought I would bring in some other pictures really fast lol.. Now this camera isn't mounted in the normal space because it is to cold and takes some time that I don't want to Freeze to install.. So this is about 10ft from where it normally goes. But I wanted to show you the 37x camera.. Please note these pictures are with no other Light other then what is outside for now seeing my son is using the Power supply from my IR blaster that goes in the back yard... Also please understand that I don't use my camera to peer on my Neighbors that is just strange.. This picture is just to show what the camera could do. This camera is 2014. I just got done repairing it. A Capacitor and 12v Voltage Regulator went out. Don't have a Schematic to I had to do old school troubleshooting and fault finding... Anyway took longer then I wanted because I had to order the part from China off Alie and was starting to wonder if the part would ever get here lol.. Anyway the pictures speak for themselves. Main reason I still keep these cameras is because I use alot of the options they come with and can't find a replacement that offers enough of what I use... Please note only doctor of pictures is I reduced the size of them and I covered up 1/2 the LIC Plate..
This picture is of the house that the second picture is looking at.
Screenshot (842).png
Screenshot (842).png (623.12 KiB) Viewed 412 times
This is from Across the street, Though my backyard and the back and front yard of my back neighbor While I could make out the porch number I hit the focus to remove it some but the House number over there could be read.
Screenshot (843).png
Screenshot (843).png (463.73 KiB) Viewed 412 times
This is other side of camera pointing to the front of my house. Straight across the street is the car of the plate in the next picture
Screenshot (847).png
Screenshot (847).png (581.57 KiB) Viewed 412 times
13.5x zoom no light other then outside light
Screenshot (846).png
Screenshot (846).png (522.6 KiB) Viewed 412 times
Be Safe.
HakimJacob
Posts: 1
Joined: Thu Jan 07, 2021 9:44 am

Re: Night time setting

Post by HakimJacob »

Hi...i would recommend to Turn sharpness way down, like 25 because as all it does is make the noise sharper. Turn gain down a bit. Make sure Smart IR is not checked. I use 1/30th/sec max exposure. WDR off. Noise Reduction at 100 (ironically I turn this off on some cameras because it causes some blurring during the day).
Post Reply