Having a few issues with these (6) cameras.
1) One has no time stamp displayed during live view.
2) Cameras that have time stamp show wrong date/time, looks like default year 2000...
3) Can't get motion detect and record to work on any. All have 32 gig Micro sd cards.
4) Is there a way to capture all camera activity on a network drive on my network?
ipm-hx1b
Re: ipm-hx1b
Hello gerimark,
1) You can enable time stamp by logging into the camera web interface on a PC. Go to set up > Video > Overlay and enable time stamp.
2) To correct the time, go to set up > System > General and under date & time , use the sync time with PC option.
3) Make sure the cards are detected under setup > Storage > destination > Sd card. Set the recording schedule to detect motion.
4) It can record to a FTP enabled network drive but has limited compatibility. You can try a NAS like WD Cloud to record cams via FTP.
Please give us a call if you have additional questions.
https://amcrest.com/contacts
1) You can enable time stamp by logging into the camera web interface on a PC. Go to set up > Video > Overlay and enable time stamp.
2) To correct the time, go to set up > System > General and under date & time , use the sync time with PC option.
3) Make sure the cards are detected under setup > Storage > destination > Sd card. Set the recording schedule to detect motion.
4) It can record to a FTP enabled network drive but has limited compatibility. You can try a NAS like WD Cloud to record cams via FTP.
Please give us a call if you have additional questions.
https://amcrest.com/contacts
