IP2M-842 Settings reset constantly (log portion attached).

[Ghostyroasty]

I have noticed after a few hours, seemingly random, my camera resets the settings to default. I am using MotioneyeOS to do motion detection and I have a user account set up just for it. On the last log, I noticed the settings reset back to defaults because the motion detection started on the camera. the 192.168.1.81 address is the motion detection software. 1.2 is me logging in to check on it. Here is the clip from the log file:

887 System 2016-07-06 22:48:18 Event End {"Channel No.":1,"Event Type":"Motion Detect"}
888 System 2016-07-06 22:47:56 Event Begin {"Channel No.":1,"Event Type":"Motion Detect","Region Name":["Region0"]}
889 System 2016-07-06 22:38:50 Event End {"Channel No.":1,"Event Type":"Motion Detect"}
890 System 2016-07-06 22:38:45 Event Begin {"Channel No.":1,"Event Type":"Motion Detect","Region Name":["Region0"]}
891 System 2016-07-06 22:36:56 Save Configuration {"Name":"Motion Detect"}
892 motioneye 2016-07-06 22:36:51 Logout {"Address":"192.168.1.81"}
893 motioneye 2016-07-06 22:36:51 Login {"Address":"192.168.1.81"}
894 System 2016-07-06 22:36:45 Save Configuration {"Name":"Encode"}
895 System 2016-07-06 22:36:35 Save Configuration {"Name":"Encode"}
896 admin 2016-07-06 19:17:24 Logout {"Address":"192.168.1.2"}

[stevecccc]

This issue has existed since October 2015. Amcrest has apparently decided it's not worth it to fix the problem no matter how many people have the issue.

https://amcrest.com/forum/ip2m-841b-set ... -t374.html

[Ghostyroasty]

I wished I had known before. Having to import my settings every few hours is not an experience I wanted.