Failed to Save Configeration

[jbfoster]

I have 2 IP2M-841B cameras. I am using the Amcrest IOS app to set the Recording schedule.

Configuration Center>Recording Schedule>select which camera to edit>Click on the pencil

I then make the changes I want and then click on the disk icon to save.

A box pops up for a few seconds that says, Failed to save configuration.

One of the cameras saves the configuration but the other camera won't.

I've looked at the settings and both cameras are set up the same.
well, one camera is hooked up wired and the other is WiFi but I wouldn't think that would matter. All the other settings will save in the Amcrest app for both cameras.

Any idea what's wrong?

Thanks
Jim

[longedge]

I had 2 cameras (now down to 1) and neither of them was reliable over wi-fi. When connected via ethernet there was no problem. If you've got one camera connected by wi-fi and one by ethernet and one of them is causing the problem, which one is it? If it's the one on wi-fi I would try connecting it by ethernet.