Amcrest doorbell chime issue

[Carini33]

I've got the device reading img files off the sd-card, I tried loading the Dahua Doorbell firmware, didn't work, but at least reads the files. If anyone can export their BIN or has one, let me know! It hard because this is a smart device, and I think all upgrades are done with mobile app from the cloud, so maybe someone with a working doorbell could use wireshark to figure out how to download the bin...

## Checking Image at 82000000 ...
Legacy image found
Image Name: kernel
Image Type: ARM Linux Firmware (uncompressed)
Data Size: 1248424 Bytes = 1.2 MiB
Load Address: 00110000
Entry Point: 00270000
Verifying Checksum ...
OK
Programing start at: 0x00110000
SPI probe: 16384 KiB hi_fmc at 0:0 is now current device
write : 0%
write : 0%
write : 5%
write : 10%
write : 15%
write : 20%
write : 25%
write : 30%
write : 35%
write : 40%
write : 45%
write : 50%
write : 55%
write : 60%
write : 65%
write : 70%
write : 75%
write : 80%
write : 85%
write : 90%
write : 95%
write : 100%
done

[Carini33]

Pretty much gave up on this doorbell, but I see a new firmware version is out. Has anyone been able to download the bin file outside of the app? I'd like to try to revive this pos if I can... I cannot find it online, and I would need a working doorbell to try using wireshark to see where its downloading the bin file from.

[amcrest168]

@Carini33, why not raise a ticket and obtain the bin file directly from amcrest smart home support?