Amcrest 960h
Amcrest 960h
hey guys recently bought the 960h setup and I'm having trouble already. After spending 3hours installing the cameras and rerouting wires. When i was setting up the menu it wouldn't let me select the hard drive. I bought the 1tb model. Its just blank when i go to select the memory. Did i just get a bad hard drive?
Re: Amcrest 960h
Any way to tell if the device is recording? the hdd light is on(red). it runs off every 12-13seconds for a sec and then comes back on. it keeps repeating.
Re: Amcrest 960h
Hello SINGH360,
On the monitor , go to menu > System > HDD. it should shows your hard drive with the available space. Select the drive and click the Init button on the bottom right. It will format the drive and make it ready for use. if nothing shows up here at all, the drive might be faulty or having a loose connection.
On the monitor , go to menu > System > HDD. it should shows your hard drive with the available space. Select the drive and click the Init button on the bottom right. It will format the drive and make it ready for use. if nothing shows up here at all, the drive might be faulty or having a loose connection.
