4mp ptz poe stream issues

[2xcheck]

I have 2 of these identical, ethernet from router to poe injector then out to both units. About 75 ft from router . On my cameras in Live view KB/s go to 1300 bounce around then go to zero. I left video stream setting on 1 camera with original settings and same issues. Not sure where they should be at any clues

[Revo2Maxx]

So I am going to guess your talking about the 1053?

Hello and Welcome to the Forum

So there are a lot of things that can be wrong.. One of the biggest issue is bad Cables, bad network port on switch or in your case Injector... Could be software your using or just to small of a network..

Are you talking about working over your lan or though your internet over p2P or port forwarding?

If you take your cable that your connecting though and pinch between your index and thumb does the cable go flat?

[2xcheck]

New cat6e cables . 1053ew speed dome. Had same model camera working for last 6 months installed another camera today . I set using p2p. Issue persistent over home wifi and cellular connection.

[2xcheck]

Update , Resolved KB/s dropping out on both cameras by not having both set to a static ip. Next question is 1 camera is looking at a street would like to record 24/7 with best quality. Not sure about fps and bitrate is that something you just kind of play around with currently I have it at 30fps and 2048 on extra and 8192 on main . Max settings I guess no clue been playing around cant find a difference image is very jumpy when watching live

[Revo2Maxx]

Best quality comes with playing around with settings.. Sadly at times for no understandable reasons I will get some motion blur on my system maybe once or twice a month. However last month I had it for a couple of days in a row....

Most times 22 to 30fps is where I set mine.. However for the most part you can't tell the difference so I keep them as close to 22 as I can.. Something you will want to play around with Bit because VBR while it will give best Image it can suffer on speed.. CBR while it has set amount the issue is if your in an area that don't have very much movement it fills in the space with junk to keep the constant rating..

Also remember the Higher the quality of picture/video the larger space that is required for storage and more bandwidth needed on your network..

Also while people don't like to think so.. But when you start installing more and more Ip cameras your Router and switches may start to lag much sooner then ever before. So for some a weekly reboot of the router(s) might be needed to keep things running smoothly...

Also Night time traffic High MP camera can lead to Motion blur no matter what settings you set.. Best Large Amounts of LIGHT...