1280TVL - Video Signal Dropping and Audio Static

[bnooyen]

Three days ago I finished installing the following system in my house:
https://www.amazon.com/Amcrest-Security ... ystem&th=1

Everything was working great up until this morning, when I noticed two of the cameras acting strangely.

1) One of the outdoor bullet cameras is dropping it's video feed, it plays back for about 3 seconds, then 2 seconds of black, then 3 seconds of video.. over and over. Nothing changed over night, all cabling is still secure... Is this problem common? I rebooted the DVR this morning, but still the issue persisted.

2) One of my indoor dome cameras' video quality is incredibly poor, and if I open up the video feed of that particular camera itself, on my DVR / TV (TV is acting as monitor) I hear a very harsh static. I can't seem to up the quality of it either. There are no audio lines nor capabilities in my current configuration.

In the past, when I first installed, I was able to fix quality issues by resetting the display settings back to 'Default'... but that trick doesn't seem to work anymore.

Any thoughts?

[bnooyen]

Anyone? This is pretty annoying, sometimes the system corrects itself but today it's back to dropping its feed every few seconds... nothing has changed on the install end of things...

[bnooyen]

Here is a video of my issue:
https://www.dropbox.com/s/u10vikj0wqoyz ... M.mov?dl=0

[bnooyen]

This is still happening... I've checked cables and ends, rebooted the DVR as well as camera...