My foscam FI9821P V2 with system firmware 1.5.3.15 and application firmware 2.21.2.15 is opening UDP ports to a bunch of servers rigth after restarting it and keeps them open.
Does anyone know why it is doing this ? I have two foscams that are doing the same thing, opening lots of destination port 10001 from 59900. Is there a way to disable this if its a feature?
Looking at my ntopng i see these:
Info Application L4 Proto Client Server Duration Actual Thpt Total Bytes Info
Info UBNTAC2 UDP 192.168.1.225:59900 vigothaiclub.info :10001 9 min, 13 sec 0 bps 2.72 KB
Info UBNTAC2 UDP 192.168.1.225:59900 198.255.6.34 :10001 9 min, 13 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 50.7.78.226 :10001 9 min, 12 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 178.162.208.234 :10001 9 min, 13 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 178.162.214.232 :10001 9 min, 13 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 198.16.70.106 :10001 9 min, 13 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 198.255.30.194 :10001 9 min, 12 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 198.255.32.138 :10001 9 min, 12 sec 0 bps 3.12 KB
Info UBNTAC2 UDP 192.168.1.225:59900 50.7.44.82 :10001 9 min, 12 sec 0 bps 2.95 KB
Info UBNTAC2 UDP 192.168.1.225:59900 50.7.124.48 :10001 9 min, 13 sec 0 bps 3.02 KB