Cannot connect to WIFI Pro HD
Posted: Sat Feb 24, 2018 9:33 am
I cannot connect using the Amcrest View Pro Android app. The phone puts out tone, but no response from camera.
User name and password are correct as well as network password. App asks after failed wireless set-up to connect through Ethernet. Ethernet connection will work and shows image on phone, but no image on PC.
Wireless is 802.11 B/G/N 2.4 Ghz WPA2 encription
Hardwire the camera to router and load IP config and camera is immediately found. The camera unfortunately has no picture, but it is connected. Setting can be seen, modified and saved.
Try to set-up wireless through IP config. Select SSID and put in password and nothing happens. Always says disconnected. Connection is set to Wireless as default
This camera was working fine @ another property for about 2 months. Never had any problems connecting this camera or the others that are still at the other location.
Any advice???
User name and password are correct as well as network password. App asks after failed wireless set-up to connect through Ethernet. Ethernet connection will work and shows image on phone, but no image on PC.
Wireless is 802.11 B/G/N 2.4 Ghz WPA2 encription
Hardwire the camera to router and load IP config and camera is immediately found. The camera unfortunately has no picture, but it is connected. Setting can be seen, modified and saved.
Try to set-up wireless through IP config. Select SSID and put in password and nothing happens. Always says disconnected. Connection is set to Wireless as default
This camera was working fine @ another property for about 2 months. Never had any problems connecting this camera or the others that are still at the other location.
Any advice???