Amcrest Forum

Posted: **Mon Jan 15, 2018 9:13 pm**

I can't use the android app, just fails to connect. 2 cameras. I'm doing this using my cell phone so it's not internal to my network. I can connect to both cameras just fine using the web browser on a laptop inside my network.

The heading above my Netgear picture for the ports is "external ports" and "internal ports".

: netgear.PNG (2.92 KiB) Viewed 780 times

: cam1.PNG (28.77 KiB) Viewed 780 times

: cam2.PNG (25.43 KiB) Viewed 780 times

Posted: **Mon Jan 15, 2018 9:14 pm**

: cam 1 2.PNG (17.72 KiB) Viewed 779 times

: cam2 2.PNG (17.46 KiB) Viewed 779 times

Posted: **Fri Jan 19, 2018 12:07 am**

What am I missing here? When I try to connect I just get the gray spinning circle and it fails.

Posted: **Sat Jan 20, 2018 11:43 am**

My android app works fine when I default all the port settings and disable UPnP. However, if you want to access the cams via https, I've found it necessary to activate port forwarding in the router to the https port. But with https enabled, I've found that viewing on android becomes sluggish. Maybe you need to turn off disable https in the camera?

Amcrest Forum

Do I have these ports right for Android access?

Do I have these ports right for Android access?

Re: Do I have these ports right for Android access?

Re: Do I have these ports right for Android access?

Re: Do I have these ports right for Android access?