Amcrest Forum

I have 2 ProHD WIFI cameras. Can/How do you enable continuous recording?

Hello,
Under the camera settings > Record > Schedule, make sure that the recording schedule is set to record 24/7. You can record to an SD card or NAS. With an SD card, it will not last more than a day if you record continuously. Since you have two cameras, I would suggest you get an NVR and a hard drive and record that way.

Which camera settings from which app? I've been trying through the software from the disc and through the web app... seriously, I just want to set the camera to record continuously for 8 hours per day.

The instructions keep directing me to the PC-based setup, but all I want to do is just record to my SD card. Enlightenment will be greatly appreciated!

Hello Descartes,

You can set up the recording through the web interface of the camera on PC. You need to login and go to set up > Storage > Destination and make sure the SD card is selected for recording. Then if you only wanted continuous recording, you can go to set up > Storage > Schedule and set up your schedule for general recording. Just set one period with the 8 hours you want and save the settings.