Page 1 of 1
All cameras record when one camera is triggered.
Posted: Fri Feb 17, 2017 8:35 pm
by DaddyPhatSaks
I see that the cameras need to be on different channels correct? All mine are on channel 1. How do you create different channels?
Has anyone in the history of Amcrest been able to record to a computer with one camera and not all at the same tame? According to other threads, the answer is no.
Re: All cameras record when one camera is triggered.
Posted: Sat Feb 18, 2017 7:41 am
by t84a
I don't have direct experience with the Amcrest software but I believe once you correct the configuration of the cameras, you should get a drop down box to selectvthe individual cameras in the recording schedule area.
Re: All cameras record when one camera is triggered.
Posted: Sun Feb 19, 2017 8:38 am
by DaddyPhatSaks
I know there is a way to record with one camera and not all. Anyone.....???
Re: All cameras record when one camera is triggered.
Posted: Mon Feb 20, 2017 1:22 pm
by DaddyPhatSaks
Cant believe a system designed solely for this purpose is so hard to get working correctly.
Re: All cameras record when one camera is triggered.
Posted: Mon Feb 20, 2017 5:06 pm
by t84a
What software are you using? I'll download it and look at it. It's pretty similar to Q See's software.
Re: All cameras record when one camera is triggered.
Posted: Tue Feb 21, 2017 9:11 am
by DaddyPhatSaks
Amcrest Surveillance Pro
Re: All cameras record when one camera is triggered.
Posted: Tue Feb 21, 2017 10:20 am
by t84a
Are your cameras wired or wireless. If wired, I would unplug them and restart the program and then plug in one at a time.
Re: All cameras record when one camera is triggered.
Posted: Tue Feb 21, 2017 4:26 pm
by DaddyPhatSaks
Wired. Ive rebooted them, factory defaulted them, gone through every setting possible. Seems to be a channel issue and I cant figure out how to change it.
https://amcrest.com/forum/technical-dis ... t1849.html