Page 1 of 1
Install IP camera into dome outdoors
Posted: Mon Jan 16, 2017 9:16 pm
by Einspritz
I have successfully installed the IP2M-841 into an outdoor mount housing. It has a 25 watt heating element and a micro fan to push around the warm air. [img]
There must be others whom have taken on a similar project. Anyone?
Re: Install IP camera into dome outdoors
Posted: Tue Jan 17, 2017 12:13 am
by snoggle
Getting ready to do the same thing, yours looks really cool
Re: Install IP camera into dome outdoors
Posted: Tue Jan 17, 2017 8:14 am
by Einspritz
It was a fun little project. Lots of trial and error. It gets darn cold up here in Montana but it stays warm and dry inside housing! Would you use a heat element in yours?
Re: Install IP camera into dome outdoors
Posted: Wed Jan 25, 2017 3:41 pm
by calfun
Can you post the link of where you bought the housing?
Re: Install IP camera into dome outdoors
Posted: Wed Jan 25, 2017 4:24 pm
by calfun
Would this fit the pan/tilt from Amcrest?
Re: Install IP camera into dome outdoors
Posted: Sun Jan 29, 2017 10:04 am
by Einspritz
Re: Install IP camera into dome outdoors
Posted: Sun Jan 29, 2017 10:22 am
by Einspritz
The problem I had was the 2.1 power connection. I relocated the plug to a pigtail outside of the camera to avoid straining the connection.