Hello all,
The KRACK mainly aim at the routers, hackers utilize this flaw to create a fake AP to be disguised as your WiFi. And then they build Phishing website to steal your account or credit card information. Basically, the flaw exists during the handshaking i.e. authenticating process, so your password of the router is safe.
Hi Melvin,
The above information is inaccurate. Please see the link I posted. Here are excerpts taken from said link, whose author is the person who published this vulnerability.
"During our initial research, we discovered ourselves that Android, Linux, Apple, Windows, OpenBSD, MediaTek, Linksys, and others, are all affected by some variant of the attacks."
Me: Apple and Windows do not make routers. This attack affects clients as well. A full ist of known devices is available here, which includes more then just routers:
https://www.kb.cert.org/vuls/byvendor?s ... rchOrder=4
"As a proof-of-concept we executed a key reinstallation attack against an Android smartphone."
Me: Again, not a router.
"Our main attack is against the 4-way handshake of the WPA2 protocol. This handshake is executed when a
client wants to join a protected Wi-Fi network, and is used to confirm that both the client and access point possess the correct credentials (e.g. the pre-shared password of the network)."
Me: Note the reference to client here. This is not the router.
(Under the FAQ) "Is it sufficient to patch only the access point? Or to patch only clients?
Currently, all vulnerable devices should be patched. In other words,
patching the AP will not prevent attacks against vulnerable clients. Similarly, patching all clients will not prevent attacks against vulnerable access points. Note that only access points that support the Fast BSS Transition handshake (802.11r) can be vulnerable."
Me: See above where it says "patching the AP will not prevent attacks against vulnerable clients"
Back to my original question, when will we know when a patch will come out for our cameras? Clearly now, the answer is that the existing firmware did not patch this issue. (Me reading between the lines from your last response)