I was having problems using the Amcrest android, so I did a factory reset on my IP3M-943B. Now it is default, TCP port 37777, and it works fine with my app. I plugged in my second camera, IP2M-841B, and changed the default TCP port from 37777 to 38777. I cannot connect to this camera thru the app. Upnp is diabled for both.
What am I missing.
Which port #'s for android app??
Re: Which port #'s for android app??
In android View Pro, if both cameras and the android are on the same LAN, just use port 37777 for both and the applicable camera IP address.
Re: Which port #'s for android app??
Hello,
Make sure you have changed the port in the app to 38777 as well for the second camera. If you added the cam by scanning the code then it should come up automatically.
Te next option is to use the Ip/Domain method but you need to set up port forwarding in the router for that.
Make sure you have changed the port in the app to 38777 as well for the second camera. If you added the cam by scanning the code then it should come up automatically.
Te next option is to use the Ip/Domain method but you need to set up port forwarding in the router for that.
